Chilli Jalapeno (Capsicum annuum)
These compact and colourful tins fit perfectly on any windowsill within the home or office.
A very popular thick walled, medium heat chilli used widely in Mexican cooking. Great for salsas, nachos, tacos, burritos and pizzas. Usually harvested when green but can be left to mature and turn red. Caution: Can irritate skin and eyes.
This kit includes a metal coloured pot, seeds and soil pellets. Grow and reap what you sow with these vibrant all-in-one tins!
Tin Dimensions: W:110mm x H:100mm
Tin made of galvanised steel with zinc coating.
|How To Grow||Growing Instructions (included with kit)
1) Remove all contents from the tin and add one cup of warm water to the soil pellets in a separate bowl. Allow the soil pellets to soak in the water and expand. Continue to add water until the pellets are completely expanded & the soil appears fluffy.
2) Once the soil has cooled down transfer most of it back into the tin, filling the tin to approximately 1.5cm from the brim. Leave a couple spoonfuls of soil for later use.
3) Fluff the soil in the tin with a fork, then sprinkle your seeds evenly across the soil surface. Cover the seeds with a very fine layer (5mm) of your leftover soil.
4) Place the tin in a light position but avoid direct sunlight until the seeds have germinated.
5) Once seedlings appear, apply a half strength fertiliser every two weeks.
6) Thin out by removing smallest plants, leaving the strongest 1-2 plants more room to grow in the tin. The thinnings can be transplanted into the garden or other pots.
7) You can grow your plants in the supplied tin until maturity, or transplant them into the garden.
|Important Note|| -The soil should not need watering again until seeds have germinated. However if water is required, use a water spray bottle to moisten the soil. You can tell if the soil is drying out if the colour turns from dark brown to light brown.
-Jalapenos like hot and dry conditions, only water when soil is dry and plant starts to wilt. Moisten the soil but make sure it’s not too wet. If you are unsure about the correct moisture level, press the soil gently. If the soil feels moist but no water appears, the level is correct. If water appears on the surface, gently tip the pot to its side, and let any excess water run out.
-To assist with drainage you can place some small stones at the bottom of the tin prior to adding the soil.